Polymercolored Anti-slipfloor Paint
Applications:
Suitable for bus lanes, sidewalks, non-motorized lanes,tunnels,highway speed bumps, flyovers, bus harbor, long downhill slopes, sharp curves, toll station access roads, and highway emergency stop areas.
Coating properties:
- Paint curing time is fast, construction operation issimple, low odor
- Excellent water resistance, good flexibility
- Excellent resistance to chemical corrosion
- Good temperature resistance and high slip resistance
- Excellent interlayer adhesion, high bonding strength with concrete base.
Products Categories
Get A Free Quote
Technical Index
| Pilot projects | unit | index | |
|---|---|---|---|
| Dry | Actual Dry | h | ≤4 |
| Time(25℃ ) | Actual Dry | h | ≤6 |
| Pencil hardness | – | ≥2H | |
| Wear resistance (750g/500r) | g | ≤0.02 | |
| Adhesion(grid method) | level | Pass | |
| Weathering resistance( 800 hours） | / | No significant change | |
| Resistant to 3% salt water | 7 days | No significant change | |
| Water resistance | 7 days | No significant change | |
| Resistant to 20% sodium hydroxide | 7 days | No significant change | |
| Resistant to Gasoline 120# | 7 days | No significant change | |
Construction procedure
| Construction method | Auxiliary material | Reference dosage | |
|---|---|---|---|
| Plain land | Trowel-coated polymer colored road anti-slip primer | / | 1-2(12-16mesh) |
| Primer coat | 1.Repair and sand it, thenclean the floor. 2.Apply the sealer and colored primer | / | 2-2.5kg/m² 0.5-0.75kg/m² |
| Ceramic particle layer | Scrape waterborne epoxy midcoat | Quartz sand | 2-2.5kg/m² |
| Topcoat | After 2-3 hours of complete coverage of the surface with particles, clean the surface of excess particles. | Particles | 3-5kg/m² |
